UHF wireless microphone systemn with WBP-20 belt-pack and lavalier microphone
Belt pack can be used with rechargeable batteries
Belt-pack input with line/mic switch and can also be used as guitar belt-pack!
Diversity reception for better stability and avoid signal dropouts
Adjustable squelch for stable reception, free from unwanted noise.
Tone squelch for improved reliability.
16 selectable frequencies via PLL synthesizer: up to 4 to 5 sets can be used together
Antennas on front panel for easy rack mounting
Optional RP-WMIC" 19" adapter available for rack mounting of 1 or 2 receivers
Balanced XLR and unbalanced jack output
Frequency range: 863-865MHz (free use in most European countries)
Technical Information
RECEIVER
Carrier Frequency Range: UHF band
Frequency Stability: 0,005%
Receiving Sensitivity: @ 5μV S/N ratio >80dB
Image and Spurious Rejection: 80 dB minimum
Selectivity: ＞50dB
Modulation Mode: FM
Receiver type: PLL synthesized, switching diversity
IF Frequency: 1st: 243.95MHz ~ 2nd: 10.7MHz
Tone Signal: 32,768KHz
S/N ratio: ＞94dB, @ 20kHz deviation & 60mV antenna input
AF Response: 80Hz to 15kHz (3dB)
T.H.D.: Less than 1,0% (at 1kHz)
Power Supply: DC 12V ~ 18V
Audio Output: Balanced & unbalanced outputs (Mic.= -20dB / Line = 0dB)
Current consumption: 130mA +/-10mA
Belt Pack Transmitter
Carrier Frequency Range: UHF band
RF Power Output: 10mW (max.)
Oscillation Mode: PLL synthesized, 16Channel selectable
Frequency Stability: 0,005%
Maximum Deviation: 20kHz with limiting compressor
Spurious Emission: ＞60dB below carrier frequency
T.H.D.: ＜1,0% (at 1KHz)
Microphone Capsule: uni-directional electret condenser unit
Tone Signal: 32,768 kHz
Battery: DC 3V (2x 1,5V AA size alkaline batteries ) OR DC 2.4V (2x 1,2V AA size rechargeable batteries)
Current consumption: 120mA 10mA @ 3V